The Federal Aviation Administration (FAA) is pausing the installation of routers linked to the recent nationwide ground stop while investigations into its root cause continue, a spokesperson told The Epoch Times on Tuesday.
On Monday, 13 Democratic senators had written a joint letter to Transportation Secretary Sean Duffy and FAA Administrator Bryan Bedford, calling on their agencies to pause the deployment of the Juniper devices linked to the network data overload that precipitated Friday’s ground stop.
“Deployment should resume after the FAA demonstrates the devices’ readiness for safe deployment through improved operational testing, independent validation, verified failover capability, and rollback procedures,” the senators wrote. “Congress expects a briefing on these improvements before the FAA resumes deployment of the routers.”
The FAA said it issued the ground stop on Friday out of an abundance of caution after a newly installed router at a facility in El Dorado, Arkansas, overloaded its communications and radar network with a flood of data.
L3Harris, the FAA’s network service provider, was deploying a new router at the facility and replacing copper communications lines with fiber optics, Duffy said.
The router was switched off after the data overload disrupted the FAA’s network, and the agency was investigating the device at a facility in Florida, he told ABC on Sunday.
Last week, Bedford said the FAA is in the process of replacing 2,000 Cisco routers with Juniper routers as part of ordinary business upgrades unrelated to the federal government’s modernization efforts with aviation infrastructure.
In their letter, the Democratic senators said L3Harris provided information that the FAA’s copper-to-fiber transition involves swapping out 3,648 routers with Juniper devices. The company said 400 devices have been installed so far, and 69 are already operational.
“With thousands of conversions remaining, FAA must address outstanding safety and reliability concerns before expanding installation,” the senators wrote.
They said identifying the router that failed doesn’t determine why it failed and called on the agency to investigate the matter further. The senators also requested a joint technical briefing with the FAA, L3Harris, and Juniper no later than Nov. 23.
During a press conference on Tuesday, Bedford told reporters that the FAA undergoes a “comprehensive risk management process with every installation.”
A highly trained, certified engineer working for L3Harris installed the router at the El Dorado facility under direct supervision of an FAA technician, he said, adding that the engineer had done this work plenty of times before.
Duffy told reporters this was the 69th router installation, and that the FAA had spent a year in a New Jersey tech center testing the new routers.
“There is a lack of clarity of why the router was able to have this impact on the network,” Duffy explained.
Bedford said officials don’t know the fault trigger on the Juniper router, and that it had a certain technological capability they believed had been disabled in its configuration.
“We’ve seen nothing in how the configuration on that device was changed by the installation. So there is some uncertainty that we have today as to how the configuration changed in a way that allowed this multicasting to become effective,” Bedford said.
He added that the FAA managed to duplicate the scenario that triggered the network data overload but still doesn’t know exactly why the router behaved this way.
Hewlett Packard Enterprise (HPE) manufactures Juniper routers. In a statement to The Epoch Times on Tuesday night, the company said, “The FAA is assessing the configuration and performance of all infrastructure involved to determine the cause.”
“Based on what we know and have been told by others, our equipment was working as configured,” HPE added.






















